Way back, if you wanted more than one copy of something you’d written there was no print button. If you wanted copies, each one required a bit of work. Before copiers and printers there were duplicators where you could type or draw onto special membranes that either transferred ink to a printing sheet (Banda or Ditto brand machines) or made holes in a screen to allow ink through (Gestetner or Mimeograph brands). Risograph machines are modern digital ink duplicators still in use and active development today.
One of the predecessors of duplicators was the hectograph. In the 19th century they still knew their Greek and yet were totally okay with hype, the hectograph was named after the extremely, um, aspirational idea that you could pull a hundred (ÎµÎºÎ±Ï„ÏŒ = hundred, in modern Greek) copies from one master. Once you’ve made a few hectograph copies, you’ll be more wondering what the heck they were thinking: you might get a few tens of legible copies if you’re extremely careful.
A hectograph copier is basically a sheet of jelly that soaks up certain kinds of ink from a master copy, then oozes the copies back onto paper pressed onto its surface. The ink slowly diffuses down through the thickness of the jelly, allowing different copies to be made with the same plate a day or so later.
Getting the right ink is a little tricky these days. Tattoo artists use hectograph ink to make stencils, so I got a small bottle of ink ($15) from Studio One (940 Queen St. East, Toronto). You can also use hecto/indelible pencils, but the National Tattoo brand one I got from Studio One barely transfers at all.
Making a copier in a kitchen is easy. There are several recipes online (University of Iowa Library and W0IS‘s being two: if you follow The New Standard Formulary historic ones, remember that white glue now is quite different from the hoof-and-hide renderings they used then). My recipe is a bit of a blend of all of these:
- 28 g Gelatin
(powdered, unflavoured; in North America, it’s sold under the Knox brand in little boxes containing 4Ã— 7 g sachets)
- 175 ml Glycerin
(from the pharmacy, possibly sold in the skin care section; about Â¾ cup)
- 75 g Sugar
(regular white sugar, about â…“ cup)
- 350 ml Water
You’ll need a flat tray, larger that the paper you want to use. Dollar store baking trays are ideal. I used a slightly-too-small toaster oven tray, which seemed like a good idea at the time.
- Stir gelatin and sugar into the water and leave it to soak for a few hours. It should form a translucent gel
- Heat the glycerin in a double boiler until the boiler water is just simmering
- Add the gelatin/sugar solution and stir gently until the boiler water resumes simmering. Keep heating for a few minutes until the solution turns clear
(The liquid doesn’t have to boil, just get hot enough for the gelatin to melt. Avoiding bubbles is worthwhile, as gelatin foam is not what we’re looking for here)
- Carefully pour the hot liquid into your tray, avoiding forming bubbles if at all possible
(Bubbles can be shepherded off to the edge of the plate with the tip of a scrap of paper before the liquid sets)
- Allow the tray to cool and set. This may take several hours at room temperature. The solid jelly hardly changes in appearance from the liquid form
Now draw your master. Hectographic ink is loaded with dye, so a little goes a long way. It’s also not a modern non-blotting ink, so you need to be more sparing with it than I was.
Stick the master face down onto the jelly sheet and leave it there for about a minute. I used a brayer to press the ink onto the surface. When you lift the master off the surface, you’ll end up with a slightly ruined master â€”
â€” and a crisp, reversed image in the jelly plate. I hope yours will be less blot-ridden than mine:
Now lay your copy paper onto the jelly sheet for a few seconds. Again, I used a brayer.
The copies come out remarkably dry, but should still be allowed to dry off for a while: this is a wet copy process, after all. The copier is reusable indefinitely, and should be very lightly dampened before use.
This process is kind-of on the edge of practicality, but is not without its charms. It might be worth looking at:
- alternative jellies, such as arrowroot or hypromellose. Gelatin is hydrolyzed animal collagen, and this may create ethical issues for some users. Some glycerin is also from animal sources, but less so than in the past.
- other ink/dye sources, including inkjet ink, certain water-soluble colouring pencils and other indelible/copying pencils. I have some vintage â€” possibly old enough to be quite toxic â€” copying pencils on the way to me via ebay which may work better.
- making 3d printed stamps to transfer to the jelly plate. Since the plate doesn’t need to accept a perfectly flat impression, a relief design might work better than a 3d printed direct stamp.
(aside: I’d previously tried to make a copying pad from several layers of damp kitchen towel to transfer a drawing made with Stabilo All water-soluble pencils. As you can imagine, the ink quickly diffused along the cellulose fibres, making this process at best a very qualified success â€¦