Mac Classic II rev 2 re-capping


Since the 68kMLA wiki page on Capacitor Replacement doesn’t have it, and also doesn’t seem to be accepting new edits, here’s what you need to replace the leaky capacitors on a revision 2 Macintosh Classic II motherboard (part 820-0326-B):

  • 2× 1 µF, 50 V rating (C9, C15)
  • 3× 47 µF, 16 V rating (C3, C4, C13)
  • 12× 10 µF, 16 V rating (C5, C6, C7, C8, C10, C11, C12, C14, C21, C74, C79, C106)

You’ll probably also be looking for a 3.6 V ‘½ AA’/14250 lithium battery too, as if it hasn’t leaked in the 25 years since your Classic II was made it’ll be completely flat. These can be a bit pricey and hard to find. I got one at Sayal for nearly $10.

The revision 2 Classic II board is immediately identifiable by having only two ROM sockets where the first revision has four ROMs.

Leave a comment

Your email address will not be published. Required fields are marked *