ESP8266 BASIC is seriously neat!

screenshot-from-2016-09-19-22-27-57That picture might not look much, but it’s doing something rather wonderful. It’s a tiny ESP8266 BASIC script running on a super-cheap ESP8266 wifi module. The code draws a clock that’s synced to an NTP server. ESP8266 BASIC graphic commands are built from SVG, so anything you can draw on the screen can also be saved as a vector graphic:

The runtime includes a simple textarea editor that saves code to the board’s flash:

screenshot-from-2016-09-19-22-28-53(and yes, that first line is all you need to set up NTP sync)

Among other features, ESP8266 BASIC has a simple but useful variable display:

screenshot-from-2016-09-19-22-30-17I’d picked up a (possible knock-off of a) WeMos D1 ESP8266 board in Arduino form factor a few months ago. The Arduino.cc Software now supports ESP8266 directly, so it’s much easier to program. Flashing the BASIC code to the board was very simple, as I’d noticed that the Arduino IDE printed all of its commands to the console. All I needed to do was download an ESP8266 BASIC Binary, and then run a modified Arduino upload line from the terminal:

~/.arduino15/packages/esp8266/tools/esptool/0.4.9/esptool -vv -cd nodemcu -cb 921600 -cp /dev/ttyUSB2 -ca 0x00000 -cf ESP8266Basic.cpp.bin

ESP8266 BASIC starts in wireless access point mode, so you’ll have to connect to the network it provides initially. Under Settings you can enter your normal network details, and it will join your wifi network on next reboot. I just hope it doesn’t wander around my network looking for things to steal …

Leave a Reply

Your email address will not be published. Required fields are marked *